|
|
|
Round Motor Run Capacitor, 30 Microfarad, 370 VAC.
|
Round Motor Run Capacitor, 50 Microfarad, 370 VAC.
|
Round Motor Start Capacitor, 161-193 Microfarad, 220-250 VAC.
|
Round Motor Start Capacitor, 216-259 Microfarad, 220-250 VAC.
|
Motor Start Capacitor for Hydraulic Pump Motor
400-480 MFD, 125 VAC
|
|
|
5/16x1/16-C/S(50), STANDARD O-RINGS
|
Oring for Dungs Gas Valve Flange 1-1/4" NPT
|
O-Ring for Monarch Hydraulic Pump Tank. 3.75 X 4.00 X 0.13-240
|
|
|
|
8 Pin Octal Relay Socket, DIN Rail or Panel Mount
|
Sold by the foot. Rated for 482 degrees F, 18 AWG
Nickel Plated Copper Core, 25kV DC.
|
13 mm Orifice Plate for Eclipse Thermjet Burners. Outer Plate diameter is 90 mm.
|
|
Right Angle Rajah Connector. Phenolic base. Wire connects with screw terminal.
|
Sold by the foot. Type K, 20AWG.
Teflon coated wire & jacket.
|
90 degree, 4", 304 Stainless Steel, Buttweld fitting. Commonly used to construct or repair Draft Inducers on Crematories.
|
1-1/4" NPT End Flange for Dungs Gas Valve
222-370
|
500 Ohm Resistor for converting control signal from 4-20 mA to 2-10 Volts.
|
|
With 1/4 - 28 UNF Male Threads, fits 5/16" diameter push rods.
|
16awg Stranded Shielded 220 Degree F
|
Shaft Extender for valves with 3/8" Shafts. Extends shaft to 4 inches longer and 5/8" inch in diameter.
|
Special made Shaft Extender to fit up to 5/16" Shafts.
|
1/2" NPT MALE TO 1/2" NPT FEMALE
|
Sight Glass for Eclipse Thermjet Burners. Also used in the door of B&L Machines.
|