Translate This Page
| | |
|
| |
| | |
|
|
Home > Actuators/Damper Motors
Actuators/Damper Motors
Kit to convert to Belimo Actuators
|
|
|
Direct Replacement for LF24-SR,
NMQ24-MFT US, AND NMQB24-MFT.
Commonly used on Crawford Machines.
Can be used for better temperature
control on IE&E Machines.
|
100-240VAC, 2-10VDC Signal, 35 second run time. 39" cable.
|
Belimo Spring Return Actuator / Damper Motor. 2POS SR 120V. VA Rating 7.5 VA 120 VAC
|
Belimo Actuator 2POS SR 120V W/AUX Switch.
Damper Actuator VA Rating 7.5 VA 120 VAC
|
|
|
Dungs 4 to 20 mA Actuator. 12 Seconds operating time for 90° stroke. Dungs P/N 267252.
|
Discontinued by Manufacturer.
|
Discontinued by Manufacturer.
|
120 VAC
9.5 mm Square shaft.
2-10 V, 4-20 mA, or 0-135 ohm input.
3 Auxiliary Switches.
44 in-lbs.
15 seconds run time.
90 degrees CCW rotation.
|
SQM40.155R11 Actuator, 10 mm D shaft, 2-10 V or 4-20 mA input with independent Aux Switch. 45 in-lbs, 15 seconds for 90 degrees.
|
|
500 Ohm Resistor for converting control signal from 4-20 mA to 2-10 Volts.
|
With 1/4 - 28 UNF Male Threads, fits 5/16" diameter push rods.
|
Shaft Extender for valves with 3/8" Shafts. Extends shaft to 4 inches longer and 5/8" inch in diameter.
|
Special made Shaft Extender to fit up to 5/16" Shafts.
| | |
|
|
|